From the category archives:

reference

How to set up a pressure pot for dispensing

13 April 2017 adhere academy

We have added a “how to” video to our YouTube channel. Setting Up a Pressure Pot for Dispensing is a short visual guide for preparing a pressure reservoir for dispensing materials such as adhesives, paints, lacquers, solvents, inks, coatings, oils and many other low to medium viscosity liquids from a pail or bottle. How to set […]

Read the full article…

Side-by-side syringe cartridges – dispensing two part adhesives

3 March 2017 adhere academy

Some of the two-part adhesives, sealants and other materials we supply are packaged in side-by-side syringe cartridges. In this packaging, the materials are already pre-measured in the correct ratio, saving time and material handling. The correct amounts of material are fed into a static mixing nozzle, which ensures thorough mixing whilst no air is introduced. The entire cartridge does […]

Read the full article…

Twinpacks – mixing of adhesives and potting compounds

30 September 2016 adhere academy

We supply a number of our adhesives and potting compounds in twinpacks. This convenient packaging offers benefits – the materials are pre-weighed in their correct mixing ratios, which saves time, and improves quality by removing the step of manually weighing out each part. Mixing within the twinpack reduces the handling of chemicals, cuts down on mess […]

Read the full article…

White Paper – Ensuring Success When Switching from Conventional Lamp to LED Light Curing Sources

15 June 2016 LED Curing

The Dymax white paper Ensuring Success When Switching from Conventional Lamp to LED Light Curing Sources discusses topics such as how LED curing works, the advantages of LED curing, and getting enough information to switch successfully. LEDs, or light emitting diodes, continue to gain popularity as a replacement for traditional light bulbs, not only in homes […]

Read the full article…

White Paper – Potting compounds for ATEX certification

31 May 2016 encapsulation

Getting your product ATEX certified for use in explosive environments can be a challenging process. If your ATEX protection concept depends on a potting compound, then the certification body will have a number of technical and commercial demands of you, the material, and the material supplier/manufacturer. Our latest White Paper, ATEX Certification for Electronics cheap […]

Read the full article…

adhere academy: premixed and frozen adhesives

18 May 2016 adhere academy

You can buy two (or more) part adhesives which have been pre-measured into the correct proportions, mixed and degassed, filled into a dispensing syringe or cartridge, and then frozen to stop the cure. The adhesive is shipped from the factory to you in an insulated box also containing ice. Upon delivery, you store the adhesive […]

Read the full article…