From the category archives:

dispensing

Case study: automated silicone dispensing for illuminators in the detector and security industry

15 June 2017 case study

Our customer, GJD designs, produces and sells intruder detection products at its factory and head office in Heywood, Greater Manchester. One of GJD’s main products is its line of white-light and infra-red LED illuminators, marketed under the company’s Clarius® brand. Used principally in security applications, they also find other uses, including broadcast production. High performance […]

Read the full article…

Smooth flow dispensing tips – new smaller sizes

8 May 2017 dispensing

We have two new precision dispensing tips to add to our smooth flow tapered dispensing tips range. Responding to research conducted, the dispensing tips were developed to aid the problems associated with the increasing miniaturisation of applications. Smaller applications tend to require more precision and smaller deposit sizes of material. Some methods using conventional tips like straight blunt […]

Read the full article…

How to set up a pressure pot for dispensing

13 April 2017 adhere academy

We have added a “how to” video to our YouTube channel. Setting Up a Pressure Pot for Dispensing is a short visual guide for preparing a pressure reservoir for dispensing materials such as adhesives, paints, lacquers, solvents, inks, coatings, oils and many other low to medium viscosity liquids from a pail or bottle. How to set […]

Read the full article…

Precision dispensing tips – variety pack available

13 March 2017 dispensing

Micron-S Precision Dispensing Tips provide high accuracy for small deposit fluid dispensing. Designed to offer low resistance to fluid flow, they deliver all the advantages of plastic smooth flow tips, but with superior accuracy. Because they are metal rather than plastic, they can be manufactured at higher tolerances and are more robust. They also offer […]

Read the full article…

Side-by-side syringe cartridges – dispensing two part adhesives

3 March 2017 adhere academy

Some of the two-part adhesives, sealants and other materials we supply are packaged in side-by-side syringe cartridges. In this packaging, the materials are already pre-measured in the correct ratio, saving time and material handling. The correct amounts of material are fed into a static mixing nozzle, which ensures thorough mixing whilst no air is introduced. The entire cartridge does […]

Read the full article…

preeflow® eco-SPRAY dispenses abrasive solder paste

17 February 2017 dispensing

The preeflow® eco-SPRAY’s reliable, extremely precise and repeatable dosing results are finding new applications; for example, it can spray solder paste. A series of trials testing the capabilities of the preeflow eco-SPRAY for the application of solder paste had excellent results. Manual application of solder paste (left) vs. eco-SPRAY (right) Solder pastes are mixtures of solder powder and flux […]

Read the full article…